4 Flutes Watchmaking Tools (WM4)
Micro end mills for milling available with or without coating
| Reference Number | Diameter D (mm) |
Cutting Length L1 (mm) |
Total Length L (mm) |
Shank Dia d |
Note |
Price 1 Pce |
Price 10 Pce |
|---|---|---|---|---|---|---|---|
| 120.301.001 | 1 | 2.5 | 40 | 4 | 16.00 € | 144.00 € | |
| 120.301.002 | 1 | 4 | 45 | 4 | 18.80 € | 169.20 € | |
| 120.301.501 | 1.5 | 4 | 40 | 4 | 16.00 € | 144.00 € | |
| 120.301.502 | 1.5 | 6 | 45 | 4 | 18.80 € | 169.20 € | |
| 120.302.001 | 2 | 5 | 40 | 4 | 16.00 € | 144.00 € | |
| 120.302.002 | 2 | 8 | 45 | 4 | 18.80 € | 169.20 € | |
| 120.302.501 | 2.5 | 8 | 45 | 4 | 16.00 € | 144.00 € | |
| 120.302.502 | 2.5 | 10 | 50 | 4 | 18.80 € | 169.20 € | |
| 120.303.001 | 3 | 8 | 45 | 6 | 17.80 € | 160.20 € | |
| 120.303.002 | 3 | 12 | 50 | 6 | 20.20 € | 181.80 € | |
| 120.304.001 | 4 | 11 | 45 | 6 | 17.80 € | 160.20 € | |
| 120.304.002 | 4 | 16 | 55 | 6 | 20.20 € | 181.80 € | |
| 120.305.001 | 5 | 13 | 50 | 6 | 19.00 € | 171.00 € | |
| 120.305.002 | 5 | 20 | 60 | 6 | 22.30 € | 200.70 € | |
| 120.306.001 | 6 | 13 | 50 | 6 | 19.00 € | 171.00 € | |
| 120.306.002 | 6 | 24 | 70 | 6 | 23.10 € | 207.90 € | |
| 120.308.001 | 8 | 20 | 60 | 8 | 28.50 € | 256.50 € | |
| 120.308.002 | 8 | 32 | 80 | 8 | 33.00 € | 297.00 € | |
| 120.310.001 | 10 | 22 | 70 | 10 | 38.90 € | 350.10 € | |
| 120.310.002 | 10 | 40 | 100 | 10 | 52.70 € | 474.30 € | |
| 120.312.001 | 12 | 26 | 75 | 12 | 45.20 € | 406.80 € | |
| 120.312.002 | 12 | 48 | 100 | 12 | 63.50 € | 571.50 € |
